Difference between revisions of "TestIT:Configuration"

Revision as of 11:08, 23 August 2019

6. Configuration

The configuration service allows you to create, update, and delete symbols. It is also possible to configure devices, make application configuration, and setting up the license.

An overview of configuration:

Options

Home - go back to home screen
Application configuration - go to application configuration
Symbol handling - go to symbol handling

6.1 Symbol handling

Select the symbol handling button and the symbols will be shown. In symbol handling it is possible to edit, delete, and create symbols. Some of the symbols are special symbols.

Options:

Home - go back to home screen
Application configuration - go to application configuration
Devices - go back to devices

6.1.1 Add symbol

Add symbol:

Press the Add symbol text in the functions window
Fill in the required and the wanted optional information
Press OK – or Cancel and the user will not be created

The required information:

Symbol type
Symbol name

The optional information is:

Comment – A symbol description
Unit – This type of the data etc.; Bar, pa, mm.
Default value – It will be the value of the symbol at each program start
Program symbol – Select if it can be used as a program symbol (Program symbols)
Format – Depending on the symbol type. Look at Symbol formatting to see which format to select

6.1.1.1 Description of symbol types and symbol names

To see some Standard TestIT symbols, press here.

Symbol type:

Symbol type
INT (whole number)	Min. value: -2.147.483.648 Max. value: 2.147.483.648 Example: 2598
STRING (text)	Min. value: 0 Chars Max. value: 1200 Chars Example: "Hello Nolek"
BOOL (true/false)	Min. value: 0 Max. value: 1 Example: 1
DOUBLE (decimal number)	Min. value: -1,7976931E+308 Max. value: 1,7976931E+308 Example: 0,00235

Symbol name:

The allowed characters are 0-9, A-Z, $, _, no spaces, max 50 characters. See the table of defining symbol names

	Used for	Description
_intSym01	Internal program symbols	Symbol of type INT, symbol for use internal in the program
$SetpointVacuum	Program symbol	Used for program symbols

6.1.1.2 Symbol formatting

INT symbol	No formatting
STRING symbol	No formatting
BOOL symbol	1/0 ~ True/false ~ OK/NOK ~ Yes/No
DOUBLE symbol	None ~ 0 ~ 0.0 – 0.000000000 ~ 1.0E+00 ~ 1.00E+00

6.1.2 Edit and delete symbol

Edit symbol:

Select the Edit symbol on the line with the wanted symbol
Make the wanted changes
Press OK – or Cancel and the changes will not be saved

Delete symbol:

Press the Trash symbol on the line with the wanted symbol
A box will be shown; select Yes to accept or No if not

6.1.3 Special symbols

The special symbols are normally used together with I/O’s. The special symbols are:

Start symbol – Works together with the START button in production
Stop symbol – Works together with the STOP button in production
Emergency stop symbol – Works together with the emergency stop button on the machine
Retest symbol – Works together with the RETEST button in production
Pause symbol – Will immediately stop the running code. When it is free again it will continue running the code
Reset NOK symbol – Works together with the RETEST button in production

Add a special symbol (is the same for all the special symbols):

Select the wanted special symbol and it will show a window
Press the green Add symbol
Select the symbol name
Select the trigger value
Press Save – or Cancel and the symbol will not be added

Remove a special symbol (is the same for all the special symbols):

Select the wanted special symbol and it will show a window
Press the red remove symbol on the line with the wanted symbol
Press Save, and the symbol is removed

6.2 Application configuration

Press the application configuration button to setup the license. It is also possible to create more setups.

6.2.1 Production

Production

The production functions make it possible to create some settings for

Batch
Icons
System buttons

They will be explained below.

6.2.1.1 Batch

Batch is the structure of the batch number used in the production and results can be selected.

Create a batch: The first space named Batch example will show what the batch configuration will look like.

Select the date format
Select the split character, which is the split character between date and running number
Select the counter length of the count number
Select if it can use date as default (NB, if the mark is removed, the operator will be prompted for a batch number when a new production is starting)
Press Save and the batch configuration will be saved

6.2.1.2 Icons

Icons is the icon to show if an object is tested as bad or good. It can be configurated.

Create an icon configuration:

Select the success icon (it will show an example)
Select the failed icon (it will show an example)
Press Save and the icon configuration will be saved

6.2.1.3 System buttons

System buttons is where the setup of the buttons take place.

Create a system button:

Press the New button
Enter the button values (see the button values below)
Press Save, and the button is saved

Button values:

On text – When the symbol value is 1, the text “light on” will be active
On tooltip – When the symbol value is 1, the text “turn of the light” will be active
Off text – When the symbol value is 0, the text “light off” will be active
Off tooltip – When the symbol value is 0, the text “turn on the light” will be active
On color – When the symbol value is 1, the button frame color will be the selected color
Off color – When the symbol value is 0, the button frame color will be the selected color
Password – If the button control needs to be protected by password, type the password text. If blank, no password is needed
Symbol name – Select the symbol name to control with the button
Active – The button is only visible when active is marked
Order – Set the number where the button will be placed

Edit a system button:

Select the wanted system button to the right
Make the wanted changes
Press Save, and the changes will be saved

Delete a system button:

Select the wanted system button to the right
Press Delete, and the button is deleted

6.2.2 License

License

License makes it possible to insert a new license. This can be needed if the configuration needs to be changed; then a new license can be filled in.

NB! After this the application must be restarted.

6.2.3 Application

Application

Application make it possible to create some settings about

Reset layout
Show/Hide Elements
Documentation
Manual
Error log

This will be explained below

6.2.3.1 Reset layout

Reset layout makes it possible to reset the layout for pages that can be changed by the users. The areas to reset are:

Tile View
Production View
Debug View
Program editor

Reset a layout:

Press the Reset button to the right

6.2.3.2 Show/Hide Elements

Show/hide elements makes it possible to configurate the elements which will be available in the applications.

Show/Hide element:

Select to show or deselect to hide in the show area
Press Update

6.2.3.3 Documentation

Documentation will show the path to a folder. The folder is for all the wanted documents.

Create documentation:

Select the folder where the documentation is placed
Select shows the documentation folder, and the selected folder will be shown at the main menu
Press Save
Press Get files, and the files placed in the selected folder will be shown

6.2.3.4 Manual

Manual makes it possible to select where the manual is placed.

6.2.3.5 Error log

In error log, the errors will be shown. For example if TestIT shows an error, it will be in error log.

6.2.4 Database

Database

Database makes it possible to create some settings for:

Backup
Select database
Delete results
Delete SQL data log

This will be explained below

6.2.4.1 Backup

Backup makes it possible to set up a daily backup and to save the entire database on a selected disk.

Setup a backup (is the same for setup and production database):

A ‘onetime’ backup:

Select where the database .bak file should be saved, and select whether it should be the default folder
Select the name of the backup
Press backup and it will create a backup

An auto backup:

Select where the database .bak file should be saved, and select whether it should be the default folder
Select the name of the backup
Mark the auto backup setup database
Select time of the backup procedure. Please consider when production had used the PC last
Select the Save behavior of how many wanted backups
Press Save

6.2.4.2 Select database

In select database, the options are:

Select new setup database on next startup – If this is marked it will be possible to change setup database after a restart of TestIT
Select new production database on next startup – If this is marked it will be possible to change production database after a restart of TestIT

After a mark, the system has to restart before the system requires a new database setup.

6.2.4.3 Delete results

Delete results makes it possible to see the results and delete them.

Filter data:

Select the wanted filter headline
Now it is filtered

Switch to demo results:

Press the Demo button at the right corner
The results will switch between demo results database (debug area) and the results database (production).

Delete results (both results and demo results):

Select the wanted data
Press the Delete results button in the left corner, and the results will be deleted

6.2.4.4 Delete SQL data log

Delete SQL data log make it possible to see the SQL data log and delete it. Delete SQL data log:

Select the wanted data
Press the Delete button at the left corner, and the data will be deleted

6.2.5 User

User

User makes it possible to create some settings for:

User configuration

6.2.5.1 User configuration

In user configuration, it is possible to select the minimum length of the user name and the password.\\ Write the number of the wanted length and press Save.

6.3 Devices

Devices make it possible to setup, configure, and test the different devices. All the devices are explained below. To see a code example and the parameters of the commands, just follow the links.