TestIT:Configuration C9

6.3.1 C9

C9 is a Nolek instrument.

Setup fields:

• Configuration
• Test device

Configuration:

1. Write the device name and device description (required)
2. Select if the device is active or not
3. Select the following:
   1. Baud rates – Serial port parameter
   2. Data bit - Serial port parameter
   3. Parity - Serial port parameter
   4. Stop bit - Serial port parameter
   5. Com port – Will show all registered COM ports on the PC. Select them
4. Press Save

Test device:

To run a standard test:

1. Select the text in command field
2. Select the timeout in seconds
3. Press Send and the received text will be shown in the read box

After the wanted tests, it is possible to clear the text at the Clear received text button. When the tests are finished, press Unlock config and save.

6.3.1.1 Commands

• C9Execute

Back to Configuration