Difference between revisions of "TestIT:TwinCAT Install License"

From Nolek Wiki
Jump to navigation Jump to search
(Created page with "==TwinCat 3 Install License== #Insert License key to USB port #Open TwinCAT project ## At the right corner of the screen is located the TwinCAT icon. ## Right click the icon...")
 
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
==TwinCat 3 Install License==
+
#'''Insert License key to USB port'''
−
 
+
#'''Open TwinCAT project'''
−
#Insert License key to USB port
 
−
#Open TwinCAT project
 
 
## At the right corner of the screen is located the TwinCAT icon.
 
## At the right corner of the screen is located the TwinCAT icon.
 
## Right click the icon and select “TwinCAT XAE(VS 2013)”
 
## Right click the icon and select “TwinCAT XAE(VS 2013)”
 
## When the TwinCAT will open, create a "New TwinCAT Project".
 
## When the TwinCAT will open, create a "New TwinCAT Project".
−
# Add device to project
+
#'''Add device to project'''
−
## Inside the project there is a left panel with all the components.
+
## Inside the project in the left panel are all the components.
 
## Extend “IO” field and right click on the “Devices” and press “Scan”
 
## Extend “IO” field and right click on the “Devices” and press “Scan”
 
## Press “OK” and “Yes” to activate Free Run and in the Window with the devices found, select the USB and press “OK” and “Yes” to scan for boxes
 
## Press “OK” and “Yes” to activate Free Run and in the Window with the devices found, select the USB and press “OK” and “Yes” to scan for boxes
−
# Link Dongle to project. This is needed for the USB key to sync with the PC.
+
#'''Link Dongle to project. This is needed for the USB key to sync with the PC.'''
 +
## Extend “I/O”, “Devices” and in Device (USB) under the “BoxInfo” double click the “BoxState” and check the type of the device.
 +
## Extend “Tasks” and right click the “Inputs” and press “Add New Item”
 +
## Create an input with name: boxState and search the type as the BoxState’s type, select the first and press “OK”.
 +
## Double click the input you created and link it to the BoxState and press “OK”
 +
#'''Add license key as license device'''
 +
## Extend "System" and click "License"
 +
## In the middle section on the top, press "Manage Licenses"
 +
## Select TC1100 if not automatically selected.
 +
## Right click on the “License” and press “Add New Item”
 +
## Click “Search in I/O configuration…”, select the USB and press “OK”
 +
## Press “No” in the Activate stored license on Target
 +
## Back to license page, Select the USB from the dropdown menu under License Device.
 +
## Select the USB from the dropdown menu in the top, press Generate File, and save the generated Request file.
 +
## Press No to send it to Beckhoff.
 +
#'''Send Email'''
 +
## Send an email to tclicense@beckhoff.com and attach the request file
 +
## When you receive the response file, store the file in a safe place. It is the file that can be used to recover the license if needed.
 +
#'''Load license Response file'''
 +
## Press license response file and select the new response file from Beckhoff and press “OK”. Restart TwinCAT to activate the license.
 +
#'''Store license to USB Dongle'''
 +
## Go to the USB license page, and press “Store license on Dongle”
 +
## Press “Yes”, and locate the response file.

Latest revision as of 10:32, 27 August 2020

  1. Insert License key to USB port
  2. Open TwinCAT project
    1. At the right corner of the screen is located the TwinCAT icon.
    2. Right click the icon and select “TwinCAT XAE(VS 2013)”
    3. When the TwinCAT will open, create a "New TwinCAT Project".
  3. Add device to project
    1. Inside the project in the left panel are all the components.
    2. Extend “IO” field and right click on the “Devices” and press “Scan”
    3. Press “OK” and “Yes” to activate Free Run and in the Window with the devices found, select the USB and press “OK” and “Yes” to scan for boxes
  4. Link Dongle to project. This is needed for the USB key to sync with the PC.
    1. Extend “I/O”, “Devices” and in Device (USB) under the “BoxInfo” double click the “BoxState” and check the type of the device.
    2. Extend “Tasks” and right click the “Inputs” and press “Add New Item”
    3. Create an input with name: boxState and search the type as the BoxState’s type, select the first and press “OK”.
    4. Double click the input you created and link it to the BoxState and press “OK”
  5. Add license key as license device
    1. Extend "System" and click "License"
    2. In the middle section on the top, press "Manage Licenses"
    3. Select TC1100 if not automatically selected.
    4. Right click on the “License” and press “Add New Item”
    5. Click “Search in I/O configuration…”, select the USB and press “OK”
    6. Press “No” in the Activate stored license on Target
    7. Back to license page, Select the USB from the dropdown menu under License Device.
    8. Select the USB from the dropdown menu in the top, press Generate File, and save the generated Request file.
    9. Press No to send it to Beckhoff.
  6. Send Email
    1. Send an email to tclicense@beckhoff.com and attach the request file
    2. When you receive the response file, store the file in a safe place. It is the file that can be used to recover the license if needed.
  7. Load license Response file
    1. Press license response file and select the new response file from Beckhoff and press “OK”. Restart TwinCAT to activate the license.
  8. Store license to USB Dongle
    1. Go to the USB license page, and press “Store license on Dongle”
    2. Press “Yes”, and locate the response file.
Retrieved from "https://wiki.nolek.dk/index.php?title=TestIT:TwinCAT_Install_License&oldid=1735"