TestIT:Configuration S9 Data Log

6.3.11 S9 Data Log

In this data log window it is logging data from an S9.

Setup fields:

• Configuration
• Test device

Configuration:

1. Write the device name and device description (required)
2. Select if the device is active or not
3. Select the following:
   1. Baud rates – Serial port parameter
   2. Data bit - Serial port parameter
   3. Parity - Serial port parameter
   4. Stop bit - Serial port parameter
   5. Com port – Will show all registered COM ports on the PC. Select them
4. Press Save

Test device:

1. Press the test device tap
2. Write a log name (optional)
3. Press Start/stop, to start (the status lamp will turn green)
4. Verify that the results are inserted in the grid when the S9 device is done
5. To stop, press Start/ stop button again (the status lamp will be red)
6. Now it is possible to export the logged data to excel or as a CSV file
7. Delete: Mark the wanted data and Press Delete

Back to Configuration