TestIT:Configuration S10 - Revision history

NolekAdmin at 13:55, 11 September 2019

2019-09-11T13:55:41Z

NolekAdmin at 12:45, 10 September 2019

2019-09-10T12:45:32Z

NolekAdmin at 07:00, 10 September 2019

2019-09-10T07:00:35Z

NolekAdmin: /* 6.3.8 S10 */

2019-09-10T06:58:52Z

6.3.8 S10

NolekAdmin: Created page with "===6.3.8 S10=== S10 is a leak test instrument. '''Setup fields:''' * Configuration * Result symbols * Recipes * Test device '''''Configuration:''''' # Write the device nam..."

2019-08-23T08:30:44Z

Created page with "===6.3.8 S10=== S10 is a leak test instrument. '''Setup fields:''' * Configuration * Result symbols * Recipes * Test device '''''Configuration:''''' # Write the device nam..."

New page

===6.3.8 S10===

S10 is a leak test instrument.

'''Setup fields:'''
* Configuration
* Result symbols
* Recipes
* Test device

'''''Configuration:'''''
# Write the device name and device description (required)
# Select if the device is active or not
# Select the following:
## IP Address – Standard 192.168.1.176
## Port – Standard 2001
## Model – Version of firmware in the S10
## Recipe Handling – Where to get recipes from; TestIT or Moscura
## Log measure – Select only if to store measurement values
## Log folder path – Path of folder to store log in
## Graph Y axis min – Set a minimum for the Y axis. Auto if 0.
## Graph Y axis max – Set a minimum for the Y axis. Auto if 0.
## Graph secondary Y axis min – Set a minimum for the secondary Y axis. Auto if 0.
## Graph secondary Y axis max – Set a minimum for the secondary Y axis. Auto if 0.
# Press Save

'''''Result symbols:'''''
# Press the symbols tab
# Select the wanted symbols

'''''Recipes:'''''
# Select the test symbol and the recipes will be shown
# Add a new recipe
## Press New
## Write the recipe name (required)
## The optional spaces: Type, Fill, Stab, Measure, Vent, Misc
# Copy the recipe
## Press Copy
## Write a new recipe name
## Press Save
# Delete the recipe
## Choose the wanted recipe
## Press Delete and accept

'''''Test device:'''''
# Select the Open test area symbol and it will open a new tab
# To start the test, Press Connect
# To stop the test, Press Disconnect

====6.3.8.1 Commands====

Commands in S10 are:
* [[TestIT:Programming_S10#MeasureGet|MeasureGet]]
* [[TestIT:Programming_S10#MeasureStart|MeasureStart]]
* [[TestIT:Programming_S10#RecipeValue|RecipeValue]]
* [[TestIT:Programming_S10#AllRecipeValuesAsText|AllRecipesValuesAsText]]

← Older revision		Revision as of 13:55, 11 September 2019
Line 57:		Line 57:

	Find a code example and the parameters in the functions window, in section S10.		Find a code example and the parameters in the functions window, in section S10.
		+
		+
		+	[[TestIT:Configuration#Devices_in_TestIT%3A\|Back to Configuration]]

@@ Line 30: / Line 30: @@
 '''''Recipes:'''''
-# Select the "Open test area"/"View recipes button" and the recipes will be shown
+# Select the Open test area/View recipes button and the recipes will be shown
 # Add a new recipe
 ## Press New

@@ Line 30: / Line 30: @@
 '''''Recipes:'''''
-# Select the test symbol and the recipes will be shown
+# Select the "Open test area"/"View recipes button" and the recipes will be shown
 # Add a new recipe
 ## Press New
 ## Write the recipe name (required)
-## The optional spaces: Type, Fill, Stab, Measure, Vent, Misc
+## The optional spaces: Type, Fill, Stab, Measure, Vent, Misc.
 # Copy the recipe
 ## Press Copy
@@ Line 44: / Line 44: @@
 '''''Test device:'''''
-# Select the Open test area symbol and it will open a new tab
+# Select the test button and it will open a new tab
 # To start the test, Press Connect
 # To stop the test, Press Disconnect
@@ Line 55: / Line 55: @@
 * [[TestIT:Programming_S10#RecipeValue|RecipeValue]]
 * [[TestIT:Programming_S10#AllRecipeValuesAsText|AllRecipesValuesAsText]]

@@ Line 16: / Line 16: @@
 ## Port – Standard 2001
 ## Model – Version of firmware in the S10
-## Recipe Handling – Where to get recipes from; TestIT or Moscura
+## Recipe Handling – Where to get recipes from; TestIT or mosCura
 ## Log measure – Select only if to store measurement values
 ## Log folder path – Path of folder to store log in